Installing Compexity Obi

You would never see people using the Japanese Kimono, is not it? Beautiful, is not it? Actually there are various ways install Obi, but not as easy as we imagine.

Below is how to install OBI: TAIKO.

1. (place OBI on the left shoulder), measure the length of OBI to the front with a waist




2. (Place mat OBI), take part OBI or dangle a long, convolution cover the mat with a strong OBI




3. convolution loose back





4. (Lower OBI was from the front shoulder) OBI set up in the middle of the back. OBI on the circle in the body enter the forefinger and middle finger in, thumb on the outside, with a strong press




5. Fold over to form a triangle. On the outskirts of the OBI strong bind with ropes




6. Paste cushion the OBI side by side in the average to dangle with the OBI 70-80cm distance from the edges.





7. Place a cushion over the ropes OBI

8. Bunch bolster ties a rope to the front of the OBI and enter the remaining rope to the
OBI base winding



9. OBI cushion wrap, bind to the front.





10. Lift to 2 that the fall, set the size of the amount of "Taiko" which will be formed.





11. a. Remove the ends of the pin, paste to the "Taiko".
b. Hold the limits adjusted, remove the edges 2cm-3cm.
c. Fold neatly and scarves to enter the rest of the "Taiko"




12. a. In the midst bind "Obishime" future
b. Measure rope right and left "obishime" as long
c. The right of the rope "obishime" made the circle, raises a rope "obishime" to the one in the circle, press point the knot
d. Enter "obishime" to the above in the circle, pulling to the left and paste